| Field corresponding type ニ・#133;ーコンストラクショントラウトロッド
|
As for トラウティンスピン ブンスイレイ, territory of
トラウトフィッシング
*
Mountain stream limits = Mountain Stream
* High-level limits =
Upper Stream
* Middle class limits & lake = Midstream &
Lake
* Downstream limits = Lower Stream
The field
corresponding type rod which you divide into four waters, each most
BASIC you form at length.
As for the blank material which is
designed new construction (new manufacturing method) by, with past
common sense while thinking, elastic 30 トングラファイト use of high
elastic 40 トングラファイト (as for 50UL,
56UML and 60SL above 30t and 70L 30+40t) it makes possible,10%
high intensity, 30% スパインレス, actualizing 10%
light weight conversion.
In addition, and the taper
design which can be applied in the spoon where it can raise the
elasticity of ティップセクション with this
material became possible in result, ミノー.
|
When the spoon (ダイビングミノー which is
included) with the ミ no (ミノートゥイッチ) very it is
difficult, keeps pursuing the action design of the rod which it is
compatible you make the private design like inter- boron it stops
obtaining.
But, as for existence of the rod which can manage both
lure with 1, at the point where many users desire.
When of action
of the ideal which is required from トラウトロッド is thought, as
for the spoon the slow action feeling which supports the load
altogether rod, as for ミノー the first action
feeling which is easy to do トゥイッチング becomes
best.
In order this to squeeze two actions which are contrary in
one action, ブンスイレイ the waters where
each rod is used, location and casting distance, focused on lure
weight, pursued the action which matches to each best.
|
As for basic action of ブンスイレイ the moderate
taper (also medium also parabolic is said). This taper as for if
anything it is suited for the spoon. But, in order to utilize this
taper to ミノー,
with ブンスイレイ the
elastic high intensity graphite in 30t was used for ティップセクション.
Rather
than as for the main reason where the rod of slow action type is not
suited for ミノートゥイッチ, in order to
bend in the whole, underground - power was absorbed, the ミ no thinking, it does
not move and if it inserts excessive power in order to move, when
the extent rod which is inserted bends too much, to time lag occurs
in the movement of the ミ no which is linked to
itch, is because the action where ティップ is easy to become
simultaneously relatively slow, being delicate vis-a-vis the ミ no, キビキビ makes it becomes
difficult to convey. |
|
Usually, in case of トラウトロッド ティップセクション considers
damage, the elastic graphite is used low.
The medium high elastic
graphite being the rod which is inscribed, as for the part which is
really used as for the main material the fact that the elastic
material is used low is actual condition with those of one winding
in the chart.
Medium elasticity because bounce is high in
comparison with elasticity low, when you use for ティップセクション, speed of the
return becomes fast.
If speed of the return is hasty, time lag is
decreased, also delicate power becomes easy to be transmitted
depending upon high rally. In other words, ブンスイレイ underground -
expedient in order to convey power to ティップ smoothly, the
former way is the case that it has covered at speed of the bounce
which the material has not to depend on just taper design.
For
the moderate taper where the basis is suited for spoon and ダイビングミノー, ステディーリトリーブ (simply to
wind) among the spoon and the die/di bottle buffalo berry no of
subject, the kind of operation of doing the intermittent splash
resetting of ティップ
it is little, the influence almost does not appear.
|
-BSL-50ULfor Mountain
Stream
As for most being used in the highest-level mountain
stream limits the short casting. So, this short casting does
unexpectedly with difficult forcing ones.
If you mention the
ultra light/write, slow action is past common sense, but in order
the short cast to do the lightweight lure, if the necessity for the
whole rod to be soft completely it is not and is soft blurring
increasing, the control cast to pin spot becomes difficult.
As
for the action of BSL-50UL moderate slow.
When you compare to the
former slow action rod, tenderness of ティップセクション does not
change, gives Hari in the bat. Because of that, and ティップセクション function does
sufficiently at the light snap cast, because speed of the return is
quick, at the place where it is surrounded in the four side eight
one trees, the control cast whose trajectory is low with compact
swing becomes possible.
-BSL-56UMLfor Upper
Stream
With method of making the past rod, the fact that
power and action correspond to 5 feet is the basis.
But, as for
action of this rod the same moderate slow as 5 feet being, bat power
approximately 7%
UML which was made to raise (the ultra medium light/write) the
design.
In other words, if you compare with 50UL, it is the rod
where the bat is a little strong.
As for the primary factor there
is a flying distance of the casting.
5 feet 6 inches most are the
length which is suited in the high-level limits, because of that the
use range above imagining becomes wide-ranging. As for flying
distance of the casting the middle range becomes many, when
temporarily you design with the same power as 5 feet, in order to
extend distance, power of the person becomes necessary.
But, if
power is inserted, if the extent which is inserted, the rod bends,
accuracy of the extent accuracy which bends falls.
As for the
sensuous image with 7% lifting bat power,
if it is not pointed out, you do not understand with the thing, as
for power in order to bend this it is no more than minute 々 barrel ones.
But,
when the bounce which the result which power 7% was lifted is
obtained was large unexpectedly, thought at another dimension, it
resembles to golf club.
For example, the metal (amorphous and
titanium) the shaft and the titanium head etc. which are combined
raising bounce in the carbon shaft, with expedient in order to throw
from the ball to the distance, therefore with saying, there are no
times when power of the person becomes more necessary.
Being
BSL-56UML to increase bat power a little, also the cast of the
lightweight lure which it cannot depend on the weight of the lure by
raising bounce somewhat, to be far, to be able to make lower, it
does.
-BSL-60SLfor Upper Stream
As for
making these 6 feet take precedence weight of the lure which is used
(resistance) it is the action which is considered. If there is the
lure weight and this length approximately of 5g, the middle, in
flying distance and lure control with long distance, there is no big
influence with the difference of rod action.
As for problem, the
lure becomes heavy and it is the receiving place of the lure
resistance which it increases due to the fact that the line becomes
thick.
With common ultra light/write power resistance just is
supported nearly 6 tenths of ability the rod to have to use up, at
remaining 4 tenths from hook set until landing you must
handle.
If they are the calm waters, it is sufficient with this
rod action, but most with the drainage basin whose apex of the U
letter 釣 method
where the byte occurs frequently and the pushing after the flooding
where activity of the fish increases are strong, lure resistance
increases furthermore, with the ultra light/write feels power
insufficiency.
Depending, as for BSL-60SL power in comparison
with UL approximately 20% the super light/write which was lifted.
Action moderate slow resistance is supported altogether rod being
tapered, considers ミノートゥイッチ, from the bat
guide to the bat the difference in level is not made to feel has
made first tapered.
-BSL-66L, 70Lfor Midstream
& Lake
The moderate tapered design which uses the high
elastic 40t graphite material in the bat section, makes thinness
entirely. Power and acceleration of the bat which occurs
instantaneously from the back cast direction spreads to the forward
cast surpass than power of hooking, produce the extent intense
bounce where elasticity becomes high.
In case of the first
tapered rod, because bat diameter becomes thick, also bat power it
becomes strong, to bend the bat at the lure weight approximately of
7g the manpower which is suitable is necessary, in the slow tapered
rod which is easy to bend the piece and the bat, with respect to the
relationship to which ティップ becomes thick
ティップパワー
increases, the movement and the thrust/penetration of the lure
become bad.
Quality of the high elastic material is utilized
freely by the moderate tapered design of thinness in order to catch
the load where the bat is easy to bend, to move also the lure is
easy, that being supports altogether rod,, it is possible even by
power of former 2/3 to produce
sufficient flying distance.
-BSL-76MLfor
Midstream & Lake
As for basic design moderate of the same
thinness as 70L taper. The joint focusing on ティップ side 25cm, the
range of bat side 15cm meter 40cm 70L compared to 10% power it
cancels the overload which accompanies the increase of the lure and
line resistance, by the fact that it raises.
Power as for the
reason which was not made to raise, length of this rod thinks of the
whole rod the limit of ミノートゥイッチ, is in order
hold down ティップパワー, to make the
movement of the ミ
no with トゥイッチング
more delicate.
The rod is long either, grip is long or, the bat
is easy to bend by being able to hold down bat power or, naturally
flying distance substantially raises.
Because dead load hooking
up (the rod angular 60°) with the destructive test 4kg is cleared,
also the having of monster class is
thorough.
-BSL-80Mfor Lower River
Being
able to meet, you do not think ミノートゥイッチ, it is the
spoon & the rod which focuses on only ダイビングミノー. If with it
becomes, slow tapered direction becomes optimum, but being able to
meet, it has made the moderate first tapered design.
Usually,
when the spoon and the diver are operated, rod angle becomes the
horizontal vicinity.
In this case, when it becomes the long kind
of cast which exceeds 50m the line receives the influence of the
water flow over wide scope, position of the lure does not understand
due to this influence, the phenomenon which also アタリ becomes dim
causes.
This phenomenon appears extent remarkably rod angle gets
near to the water surface, the roll of the spoon with the long flat
shoal where the especially point cannot squeeze and the action
pulling of ダイビングミノー (in short
stroke operating the rod in the top and bottom, acquiring action, it
invites) with, in order to take sudden アタリ precisely, with the
purpose which floats the line if possible in the sky it operates the
rod in vertical feeling.
"The lure is moved" if, you think of
just that "the byte is led to same hook set", the rod the first
taper becomes optimum, but in order to use spoon and ダイビングミノー whose
resistance is large, ティップ passes, weakness
when the rod is raised, becomes also the primary factor of
damage.
Then, when the high elastic material, ティップ moderate first of
the medium elastic material is made tapered, from テ ィ ッ プ lure resistance is
made to receive with 2/3 to the bats, being
simultaneously, high elastic peculiarity powerful by the fact that
the bat side 1/3
which is left is operated, the design which lure action and makes
the bat same hooking provide by generating speedy torque, conveys
rapidly on ティップ
side, it has made.
-BSL-86Mfor Lower
River
The weight only of GTR-86 and the blank which were
called the cherry tree mass rod of most light weight is 69g.
The
blank weight of BSL-86M 61g, is the class most lightweight
rod.
But, it passes the lightness of weight only the result to
the last of pursuing the action of ideal.
As for basic action
from 80M moderate first taper of fog and slow feeling.
Vis-a-vis
the increase of the lure and line resistance, the design where
simply power raising it does not do, increases the burden ratio of
the load which falls on bat direction, by designating the taper
somewhat as slow, catches load altogether rod.
Considerably, it
is finished in the long distance rod which produces the preponderant
flying distance which the result of having become thinness, the bat
becomes easy, to bend utilizes high elasticity.
When also トラウトパワー of monster
class, it bends to the limits which is the bat section, exceeds
those limits you catch with the high elastic material unique quality
of the thinness which stops firmly the ず, hard do not drive
softly, weakness do not drive, バラシ while the oral
being cut off and fighting spirit at the time of hook set and line
break etc. with the urgent running are lightened by the ideal
action, not driving strongly.
-BSL-C80M and
86MBait Casting Models for Lower River2004 NEW
When also ironbound rule
of attacking from the cross stream which it should call with the
down cross the point is checked in emission line, therefore ベイトキャスティングモデル very
there is a technique which it is possible. The method that
disengaging the clutch of the reel on the trace line of the lure and
sending the lure. With spinning tackle because it cannot make this
operation smooth, the lure cannot be produced while it is mind with
the movement which will be been awkward.
In addition, at the
point which is good, controls the lure which changes with more
delicate lift & the fall the swimming layer and the swimming
with the change of resistance of the drift and the water finely, you
can realize the good quality of of the using selfishness only of
ベイトタックル.
As
for ベイトキャスティングモデル
C80M of ブンスイレイ
and C86M in order furthermore to bet polishing on the operativity,
being one-handed, it pursued the good quality of the balance which
it can manage. |
| ROD No. |
Length |
Grip
Length |
Lure wt |
Line |
Pack
Length |
Weight |
POWER |
Action |
Price\ |
| BSL-50UL |
5' |
200mm |
1 - 5g |
1 - 4lb |
80cm |
53g |
UL LIGHT |
M SLOW |
29,000 |
| BSL-56UML |
5'6 " |
210mm |
1 - 5g |
1 - 4lb |
88cm |
60g |
UL LIGHT |
M SLOW |
31,000 |
| BSL-60SL |
6' |
240mm |
2 - 7g |
1 - 6lb |
95cm |
65g |
SUPER LIGHT |
M SLOW |
33,000 |
| BSL-66L |
6'6 " |
325mm |
3 - 10g |
4 - 10lb |
103cm |
90g |
LIGHT |
MODERATE |
35,000 |
| BSL-70L |
7' |
355mm |
3 - 10g |
4 - 10lb |
110cm |
93g |
LIGHT |
MODERATE |
36,000 |
| BSL-76ML |
7'6 " |
385mm |
3 - 13g |
4 - 12lb |
118cm |
102g |
M LIGHT |
MODERATE |
38,000 |
| BSL-80M |
8' |
425mm |
5 - 18g |
6 - 16lb |
126cm |
122g |
MEDIUM |
M FAST |
39,000 |
| BSL-86M |
8'6 " |
455mm |
6 - 21g |
6 - 16lb |
134cm |
136g |
MEDIUM |
M FAST |
40,000 |
| BSL-C80M |
8' |
457mm |
6 - 18g |
6 - 16lb |
126cm |
137g |
MEDIUM |
M FAST |
39,000 |
| BSL-C86M |
8'6 " |
477mm |
6 - 21g |
6 - 16lb |
134cm |
144g |
MEDIUM |
M FAST |
41,000 |
 |
 |
 |
|
All the type 2 piece
specifications
All the type Sic titanium frame guide and
adoption and new concept small guide specification
Hand made
diamond lap
2 surface joint the lapping (the difference in
level of the eye which the joint section was seen
reduction)
High grade all cork grip
Nickel silver
winding check |
(C) Copyright, 2001-2004 SMITH LTD. All rights reserved.
|